|
KrankVentTM
Kits
NOW
THERE IS A GENUINE KrankVent SystemTM
FOR ALL APPLICATIONS!!
International Orders Are Welcome!
(Shipped
via US Global Priority Mail, $10 US includes all Custom forms for
fast customs requirements, 4 to 6 days)
Online orders using our Shopping Cart
are made on a secure
connection. If you'd like to learn about our security
procedures,
click here.
Each kit contains a KrankVent System™ that is specially designed
for that application & comes complete with all hardware & specific
instructions. Guaranteed Performance!
HEAD BREATHER SECTION
"Performance Vents” for H-D Head Breathers
|
 |
 |
|
view 1
|
view 2
(rotated 180°
) |
ET's
"PERFORMANCE VENTSTM”
FOR HEAD BREATHERS
These beautifully engineered & machined breathers do much more than
just vent your engines fumes! For starters, they have the US
Patented Crank Case Vacuum Valve built into them. So instead of just
looking good but blowing oil all over you & your engine, these vents
actually perform! The crank case vacuum they produce results in
greater engine efficiency, faster response, better ring seal, no
weeping gaskets, plus other advantages.
The
303 stainless steel bolts, designed by ET, have machined bosses so
mounting brackets, breather holes, & vents align perfectly with the
vent eyelets.
Essentially a one-piece design, there is nothing to vibrate loose so
you won't find them bouncing along the road besides you! Rotate 180
degrees for a plain look with vents hidden.
 Best
of all, they are designed by ET Performance & Racing Products, who
brought you the original crank case vacuum valves (KrankVents) & are
made in the USA, of course! Guaranteed performance!
Available for all head breathers: Big Twin, XL's, & Twin Cam
engines, of any displacement. Complete with ET’s special
Stainless Steel bolts, washers (plus extras), instructions.
PV1: Single vent, bolt, washers, complete (only one is needed for
any size engine)
PV2: Set of two, complete (2 PV’s look cool, or 1 for a buddy & save
either way)
|
1 Performance Vent
Single
vent, bolt, washers,
spacer for other side, complete kit.
Part No. PV1
Retail: $129.95
|
Pair of Performance Vents:
Two Vents,
bolt, washers,
spacer for other side, complete kit.
Part No. PV2
Retail: $229.95
|
SEE BELOW FOR MORE OPTIONS
A HEAD BREATHER KIT FOR ALL EVO, XL, & TWIN CAM ENGINES AT A SUPER
PRICE
|
For all Twin Cam’s & 93 to Present Big Twins, 91 & later
XL’s
Click for larger view
Small Design
with Simple Installation!
|
Twin Cam & EVO Head Breather Kits
The Original & Patented Performance of the KrankVent™ is
available for all head breathers! No more oil discharge all
over you or your bike, no matter how hard you ride! These
mini KrankVents™ provide a Hi Tech touch & blend in with
your bike's appearance.
Each Kit includes:
2 ET KrankVents, 2 of ET’s Stainless Steel Breather Bolts,
washers, tubing, Y, Instructions, extra washers.
|
Twin Cam
Part No. TCH1
Retail: $139.95 |
|
|
93 & Later EVO's, 91 & Later Sportster
Part No. EVH2
Retail: $139.95 |
|
|
|
(Click
for larger view)
|
Designed for "head breathers" that use
banjo bolts
similar to those used with
S&S carburetors.
Instructions give preferred methods of installing. The
banjo bolts are Tee'd together & the KV installed on the
output. Simple!
|
Part No. ETSS
Retail: $75.95 |
|
|
|
(Click
for larger view)
|
91 to present XL's: No
More Blowing Oil! Just replace the original
4” hollow bolts with the KrankVent bolts that have the
Patented KV Valves built into the bolt heads Requires OEM
style backing plate that breathes into filter element holes.
Very clean! "Out of Sight" Solution for XL head breathers!
|
Part No. XLHB3
Retail: $95.95 |
|
|
|
(Click
for larger view)
|
BUELL & SPECIAL APPLICATIONS:
Racers & engine builders have asked for a simple, compact
KrankVent™ that connects to the head breather ports & here
it is. These compact bolts have the KrankVents built into
the heads! Available in ½” threads (shown) for EVO’s or 3/8”
threads for Twin Cam engines. Kit includes 2 Buell/SA
bolts, instructions.
|
Part No. BUELL/SA
Retail: $75.95 |
|
|
|
(Click
for larger view)
|
93 to present BIG
TWINS using FACTORY backing plate & breather
tubes inside the air box. Detailed but simple
instructions describe how to install two “micro vents” into
the factory breather hoses. Installation is completely out
of view. Neat!
|
Part No. ETBT
Retail: $95.95 |
|
|
(Click
for larger view)
|
These instructions cover the configuration for the
Screaming Eagle
style
"head breather" adaptor that is a rigid chrome pipe that
connects the two breather ports.
Also use this kit for
|
Part No. ETSE
Retail: $75.95 |
|
|
A SPECIAL CRANK CASE BREATHER!
|
(Click
for larger view)
|
A compact design, input fitted with 1/4" NPT male threads
that attach directly to the crank case breather port of
aftermarket cases; Pre-91 Sportster; Pre-93 Big Twins & cam
cover vents on early XL’s (shown below). Particularly well suited for OEM
builders who want to eliminate the bothersome umbrella
valves, rocker box mods/machining, and external head
plumbing. This can be a tight fit on Rubber Mounted engines,
check clearance. Allows head breather ports (if present) to
be blocked off. This KV will perform on ANY size engine w/
blocked head breathers!
Guaranteed!
|
Part No. ETCC
Retail: $75.95 |
|
|
CUSTOM
AMERICAN & METRIC
CRANK CASE BREATHERS
(Click
for larger view)
|
Race, Custom KrankVent™
- Top American & Metric racers & big inch engine builders
asked for it & now the ORIGINAL & BEST KrankVent™ has been
designed for –6 AN x 1/4" NPT fittings for race & custom
applications. Or, choose between 1/2" or 3/8” barb fittings.
Patented & proven performance!
|
Race/Custom
KrankVent
Part No. KVRC
$99.95 |
|
|
]
|
(Click
for larger view)
|
These Universal
KrankVents™ are the original vents used
by many custom engine builders & top racers of all
types. Internal machining/valve is the same as the KVRC
above & they are particularly well suited for
race applications
with very large displacement, high RPM engines. The KVSM
uses a custom aluminum extrusion designed by ET to
provide an integral mount that won’t break off! Exit of
KVSM is 1/8” NPT female thread; 900. & 1800
barb fittings provided w/ Stainless Steel clamps.
|
KrankVent Round
Part No. KVS
Retail: $99.95 |
|
|
KrankVent w/mount
Part No. KVSM
Retail: $119.95
(free shipping) |
|
|
METRIC RACERS & CRUISERS
|
(Click
for larger view)
Click for Installation Instructions for Yamaha Road Star,
Honda, Ducati, etc...
|
Metric Riders & Racers!
Having
trouble staying with the factory teams or just want to cure
the oil blowing out of your cruiser!! From Ducati to Yamaha
Road Stars, to high-twisting 14,000+ rpm inline 4’s, you
won't believe the results!! Top racers have tried all the
knock-off valves & they report they couldn’t hang! “We now
run with, & beat, factory sponsored teams (Over 100 wins
Daytona & Willow Springs!). The other crank case valves we
tried literally disintegrated! The KrankVent™ never stops
performing!!”
Available w/ 9.5mm or 12.7mm hose barbs. Some engines, like
the Honda VTX 1800R, use a ½” (12.7mm) hose. Some Ducati’s,
& Top Fuel bikes use a 1” ID hose & require using two 1”
lengths of the original hose to neck it down to ½” ID.
Engine vacuum will not be altered using this procedure!
Questions on race engines or street; check out R1, Roadstar,
Kawa, Ducati, etc. forums or call ET’s Cell 805.895.2679
(Pacific Time) for a specific application. We have helped
put many racers “In the Winners Circle” with smoother
response, faster acceleration, empty catch cans,
etc.! These lightweight KV’s are often preferred by top road
race teams!
|
Part No. METRIC KIT
Retail Price: $75.95 |
|
|
|
